Readers

Fixed infrastructure: Serial Readers

RX202 Serial Reader

The RX202 provides instant reporting of all detected Wavetrend active RFID tags. It allows user configurable tag data and read range filters. It can be deployed in singular use or as part of a multiple reader daisy chain network. It allows easy remote configuration via the reader network and supports RS232, RS485 and USB connection.

Information sheet

RX202 Serial Reader
RX210 Serial Reader

The popular RX210 - RS485 / RS232 Readers detect Wavetrend's Activ™ and ActivDuo™ ranges of active RFID tags. This remotely configurable reader connects to the host PC, edge server or intelligent hardware controller via RS232, RS485 or TTL and can be used singly, or networked together. It offers a connection for an external antenna. Wavetrend recommends the Inteeligent power supply be used to power RX210 reader networks.

Information sheet

RX210 Serial Reader
RX211 Access Reader

The RX211 provides instant reporting of all detected Wavetrend active RFID tags. It supports RS232, RS485 and USB connection and can operate in rugged conditions at ultra long ranges, subject to the appropriate antenna being fitted to the unit. The RX211 can be configured to run in direct control via a PC or in response mode as a standalone unit. In direct control mode the client PC will receive data from the Access reader and can switch the readers IO's on/off to lift barriers open/ shut doors as directed.

The Wavetrend RX211 provides the perfect access solution. Up to 500 unique tag IDs and IO positions can be loaded into the Access reader. An upgrade is available to increase the standard number of tag IDs and IO positions if required. Once the tag IDs and IO positions are uploaded the reader will respond automatically without the need for a PC and software application.

The RX211 data output can be selected as a Wiegand output allowing it to be directly controlled by existing door controllers.

Information sheet

RX211 Access Reader
RX1310 Network Reader

The RX1310 reader provides all your networking needs in one, it can be configured as a Wi-Fi reader, an externally powered LAN reader or a LAN POE reader. The RX1310 reader detects and decodes RFID (radio frequency identification) signals from Wavetrend's range of active RFID tags.

Information sheet

RX1310 Serial Reader

Mobile and Telematics Infrastructure

RX50 Solo Reader

The RX50 reader detects and decodes RFID (radio frequency identification) signals from Wavetrend's range of active RFID tags. It can operate in rugged conditions at ultra long ranges, subject to the appropriate antenna being fitted to the unit. The data from detected tags is sent by the reader via RS232 or USB to authorised corporate computing systems.

Information sheet

RX1510 GPRS Reader

The RX1510 reader breaks the boundaries of wired deployment, powered from any 6V to 28V supply its applications are as wide as the requirements of the installer. The RX1510 GPRS Reader provides complete global visibility of Wavetrend tagged assets regardless of location and communicates tag data over global GPRS cellular networks.

Information sheet

End-Cap Reader for Psion Teklogix Workabout Pro G2 (RX2100)

The End-Cap Reader (RX2100) is specifically designed to fit onto Psion Teklogix Workabout Pro G2 handheld computers running Windows® Mobile™ 5/6. The reader detects Wavetrend's Activ™ and ActivDuo™ ranges of active RFID tags of combining active RFID tag and barcode scanning, GSM/ GPRS and WLAN real-time data reporting and GPS location recording to suit the most challenging remote/ mobile asset management needs.

Information sheet

End-Cap Reader for Psion Teklogix Workabout Pro G2 (RX2100)